Ceres Printing Rubber Blanket Uv Printing Offset Ink Red
Characteristic:
UV solidification and ultraviolet rays resistant. Convenient use,
low thickness reduce for good print quality.
Attention:
1. Before installation pleasure measure the thickness of blanket
for adjusting the
press accurately.
2. While installation please use the constant wrench to tighten
gradually.
3. After installation please clean the rubber surface and ready for
print.
4. During the use please often use the special solvent to clean the
rubber surface
for extend the useful time.
| Color | Red |
| Artical NO. / Thickness | 366: 0.077"/ 1.96mm |
| Elongation at 500N/ 50mm | ≤0.9% |
| Compressibility at 1350kPa | approx. 9% |
| Tensile strength | ≥4500N/ 50mm |
| Hardness total | approx. 78 Shore A |
| Surface rubber | approx. 58 Shore A |
1. EPDM surface compound resistant to UV inks and aggressive
washing solutions
2. Extremely resistant compressible layer
3. Low dot gain
4. Best contrast values
5. Outstanding results in solid and half-tone printing
Founded in 2004, Guangzhou Print Area Technology Co., Ltd has our
own professional ink R&D Department. We have developed
high-quality eco-friendly soy offset printing ink, including the
Anti-skinning high gloss offset printing ink, all kinds of security
ink etc.
Besides, we could mix all the pantone color for our customer. In
this decade, we deal in all kinds of printing material, we are the
agent for Conti-Air printing blanket, UV MEGACURE ink/gold and
silver ink, Switzerland FOLEX H 45 under-packing foils, Germany
marks-3zet underlay sheets, Quick print/quick drier plus, Ceres
rubber blanket, England Hammond chemicals, etc. Advantages
resources: we have the professional sales team and technologist
with 16-year experienced in printing industry. Moreover we have our
own R&D Development to develop the new products
